Add Panel Pal to your tool bag and start working safer today!

Panel Pal is easy to use. Simply follow the steps below.

1. Open the panel lid all the way. Push up slightly so the lid is just past horizontal, if possible.
        

2. Fit Panel Pal over the right side of the panel cover, and slide it all the way towards to the hinges until Panel Pal is firmly against the wall adjacent to the panel. NEVER INSIDE THE PANEL. Pull down slightly on the handle so that it "bites" into the lid. 
        

3. Slowly release the lid. The weight of the lid will hold Panel Pal against the wall.
        

To Remove Panel Pal from the lid, simply lift the cover slight to release the weight of the cover from Panel Pal.

NEVER INSERT THE Panel Pal INSIDE THE PANEL

 SAFETY PRECAUTION
Nearly all electric panels are grounded. It is a common misconception that just because you are wearing rubber sole shoes that you cannot get shocked or electrocuted. If you are touching any part of the panel, including the cover, and you come into contact with an energized component, you can get electrocuted.